I had the carbs cleaned out, new plugs put in, and getting new front and rear air filters put in on Tuesday. I took old ones out and it still is not accelerating quickly, Any ideas?
✅ Answers
? Best Answer
did you get the float levels rest while the carbs were off?
Check tappet clearance
Do a compression check on the bike
Check timing
Run bike in the dark & check for tracking on the plug leads – also check for fat blue spark at plugs.
Check choker comes fully off
Check both carbs open equally.
With engine cold , start it & monitor how long it takes both headers to heat up, first at idle. Cool down & do it again at part throttle – careful they’ll heat up very quickly so check well down the pipes (same distance on both of course) This will tell you if both cylinders are working equally