So I was trying to print my homework, so I put the paper it but it seems I pushed it to far back and it got stuck. Oops! Any ideas on how to make it unstuck? Thanks!
2
✅ Answers
🥇 Favorite Answer
Clear any loose paper from the paper tray. This will help you locate the jam. You will find it either in front, near the paper tray, or in the back, by opening the rear door.
Be sure there is no paper or debris hidden anywhere. Open up the rear door and use a flashlight to explore the inside. If you see any paper, have patience in trying to remove it, now gently pull using a side to side motion. If you use a tool for assistance, like a pair of tweezers, or pair of needle nose pliers, put some tape on the jaws of the pliers to help prevent the shredding of the paper.
Another good item to have handy is a can of compressed air. This can be used to blow out any built up dust or fine paper particles that may be embedded inside the printer and the sensors after much use.
Reboot your computer
While you say the sort of paper, what do you imply? Most domestic printers ordinarily use *80g/m² weighted paper and a few can manage a maximum of as much as 120g/m² * the paper weighs 80 grams per square metre. Traditional A4 replica paper. After that you simply getting as much as the thickness of card which most printers are not able to control. Appropriate card begins at 160g/m² weight.